The AD59321 is a waveform generator offering a programmable frequency scan. Utilizing embedded digital processing that allows enhanced frequency control， the device generates synthesized analog or digital frequency-stepped waveforms. Because frequency profiles are preprogrammed， continuous write cycles are eliminated， thereby freeing up valuable DSP/microcontroller resources. Waveforms start from a known phase and are incremented phase-continuously， which allows phase shifts to be easily determined. Consuming only 6.7 mA， the AD5932 provides a convenient low power solution to waveform generation. The AD5932 outputs each frequency in the range of interest for a defined length of time and then steps to the next frequency in the scan range. The length of time the device outputs a particular frequency is preprogrammed， and the device increments the frequency automatically; or， alternatively， the frequency is incremented externally via the CTRL pin. At the end of the range， the AD5932 continues to output the last frequency until the device is reset. The AD5932 also offers a digital output via the MSBOUT pin.