本文針對變壓器橫剪線生產現狀和存在的問題，在對變壓器橫剪生產線生產流程全面了解的基礎上，分析了技術要求和用戶需要，提出并開發了整個監控系統的解決方案。系統以西門子WinCC V6 為軟件平臺，設計開發了上位機監控系統。著重論述了基于人機界面組態軟件的上位機監控系統的開發，為開發變壓器橫剪生產線監控系統做了積極嘗試，取得了一定的效果。
關鍵詞：橫剪線；WinCC 組態；監控系統
Design of Industrial Control System for Cross Cutting Producing Line LI LING1 ， ZHAO ZHIPENG1，LI CHUN 2 (1 Xi`an Jiaotong University, department of Industrial Automation, Shaanxi, Xi`an, 710049, P.R. China；2 Xi’an JinLu traffic engineering scientific and technical developing, LTD) Abstract: This paper set forth the transformer cross cutting’s manufacturing status and the problem existed.According to the analysis on the technical procedure, technical demand and requirement of users, the whole scheme based on WinCC V6 is put out. The peculiar technology and functions of WinCC used in development are discussed. This paper will prove to be helpful for the development of the monitored control system used in Cropping Shear Line.
Key words: Cropping Shear Line, WinCC, Monitor control system